UPDATED 6th May
See below for masts availability of when they will leave the factory (Please note dates are approximate as small delays can happen or they can get finished earlier)
NEW 2026 Mast - 78cm SSS mast, Sold out, next available leaving the factory 23rd of May. Pre order now
84cmSSS mast, Sold out, next available leaving the factory 23rd of May. Pre order now
90cmSSS mast, Sold out until End of May. Get your Pre Order in now for the next available.
Make sure to check out the 2026 NEW products video down the bottom of this page.
Experience Next-Level Performance with the ONE Ultra High eModulus (UHM) Full Carbon Masts, engineered to the highest standards for riders who demand peak performance. Built with UHM carbon, the ONE masts deliver unmatched speed, stiffness, and responsiveness, ensuring you get the most out of every session on the water.
Key Features
Ultra-High Modulus autoclave Carbon Construction: Designed for maximum stiffness and lightweight performance, the ONE masts are built to help you push your limits. -
2-Way Tapered System: Optimized stiffness in critical areas while maintaining a sleek, flow-efficient profile for reduced drag and enhanced speed.
Axis Compatibility: All ONE masts seamlessly integrate with any Axis fuselage for a perfect fit.
Code & Lift Foils Compatibility: Use with Code and Lift foils by adding an adaptor (available as an add-on).
8mm Bolt Slots: Features bolt slots on the base plate for easy and secure 8mm bolt connections to your board or fuselage.
Titanium inserts are now standard on all masts
Quick & Easy Setup: Conveniently cut bolt slots ensure a fast and hassle-free setup every time.
The Autoclave difference- This method is considered superior to "out-of-autoclave" (OoA) molding because of its ability to achieve near-zero porosity.The autoclave’s high-pressure environment "crushes" any remaining microscopic air bubbles and volatiles within the resin.This results in a significantly higher fiber-to-resin ratio and superior interlaminar bonding, leading to parts that are not only lighter and stiffer but also up to 50% stronger in shear strength. This is why the aerospace and elite motorsport components, where structural failure is not an option and demand the best use the autoclave. The autoclave’s precision control over the curing cycle ensures a level of mechanical consistency and surface finish that other methods simply cannot replicate.
Why Choose the ONE UHM Masts? The ONE UHM mast is engineered to outperform the competition, offering superior stiffness and speed for all types of foiling—whether you're into downwind foiling, surf foiling, or wind winging. Its optimized thickness reduces drag, ensuring your wings perform at their best without any holdback.
Versatile & Reliable - All-Round Performance: From high-speed runs to smooth glides, the ONE UHM mast is your go-to for any foiling discipline. - Durable Design: Built to withstand the demands of intense riding while maintaining its premium performance.
Get the Most Out of Your Ride The ONE UHM mast is more than just equipment—it's your gateway to unlocking new levels of speed, control, and excitement on the water. Pair it with your favorite foils and experience the difference for yourself.
Ready to upgrade your setup? Add the ONE UHM mast to your gear today and take your foiling to the next level! Read below to find out which ONE mast is best suited to you and your riding.
The 2026 78cm SSS UHM Mast (Released May 7th/2026)
How do you improve on the fastest mast on the market? You redefine what’s possible.
The original 78SSS was already a benchmark for speed and control. For 2026, we didn’t just tweak the design—we re-engineered it. The new 78SSS Ultra-High Modulus (UHM) has been refined to offer less drag, a smoother ride, and a level of "invisible" performance that must be felt to be believed.
Engineering the "Invisible" Ride
The secret to the 2026 upgrade lies in its revolutionary new foil section. We’ve pushed the boundaries of hydrodynamics to create a mast that slices through the water with almost zero resistance.
Ultra-Thin Profile: Now only 11.9mm thick with a 10.2cm chord.
The Feel: This uniform thinness creates a massive performance window where the mast feels like it isn't even there, allowing you to focus entirely on the foil.
Unmatched Strength & Stiffness
Speed is nothing without control. To achieve this level of thinness without sacrificing stability, we utilize Advanced Autoclave Construction. This process ensures the highest possible carbon bonding, delivering class-leading bend and torsional stiffness. Even at high speeds or under heavy loads, the mast remains rock-solid and predictable.
Is the 78SSS Right For You?
If you are looking to unlock a new gear in your riding, this is your upgrade.
The Speed : Designed specifically for riders who want to push the limits of Downwind, Prone, Winging, or Parawing.
The control: Optimized for small-to-midsize foils. While it handles spans up to the 1080 Accelerate (1273mm span) with ease, it truly comes alive when paired with smaller high-performance Surf and DW foils.
Universal Compatibility
The 2026 78SSS is designed to fit your existing quiver seamlessly. It is compatible straight out of the box with:
Elevate Your Session
The 2026 78cm SSS UHM isn't just an upgrade; it’s a new standard. Experience the fastest, thinnest, and most responsive mast we’ve ever built.
The Legend Reborn: The 2026 84cm SSS UHM Mast
The mast that started the revolution just set a new pace.
The original 84cm was the foundation of the ONE lineup—the mast that changed the game and led the industry from the moment it launched. But for 2026, we haven’t just updated it; we’ve executed a complete ground-up redesign to bring this mast right to the cutting edge of the SSS performance line.
A Full Redesign for Endless Potential
While we kept the 12.2mm thickness that riders loved, everything else has been reimagined. The 2026 84SSS features a brand-new foil section and an optimized chord for maximum speed and efficiency.
Sleek & Consistent: Only 12.2mm thick with a 10.5cm chord, maintaining a razor-thin profile and only increasing slightly as you get higher on the mast
Redefined Foil Section: Built specifically for high-velocity riding, the new profile reduces drag and enhances glide across all disciplines.
Autoclave Precision: Constructed using our state-of-the-art autoclave process, ensuring the ultimate in carbon bonding, strength, and durability for a mast this slim.
Class-Leading Rigidity: Industry-best bend and torsional stiffness mean your input is translated directly to the foil with zero lag.
Who is the 84SSS For?
The 84cm length is the "sweet spot" for riders who need extra clearance for high-speed turns and choppy water without sacrificing an ounce of control.
Multi-Discipline Mastery: Whether you are pushing limits in Downwind, Prone, Winging, or Parawing, the 84SSS takes your performance to a whole new level.
The Performance Quiver: Optimized for small-to-midsize foils. It pairs perfectly with the ONE 1080 Accelerate (up to 1273mm span) but truly shines when pushing smaller, high-aspect Surf and DW foils to their top end.
Plug-and-Play Compatibility
The 2026 84SSS is ready to integrate into your setup immediately. It is compatible straight out of the box with:
The Original . Now Faster.
The mast that led the game has officially moved the goalposts. Don't just follow the pace—set it with the 2026 84cm SSS UHM.
90cmSSS UHM
Built for wind winging and tow foiling in mind, the 90cm UHM mast is for those who really want to push the limits.
The extra length gives a little more mast freedom when the waves and chop are bigger and conditions are just more on edge.
90cm in length, 10.5 cm minimum cord, and thickness 13.4mm.
Every ONE mast is purpose-built and targeted at certain disciplines of our foiling sports. Yes, each mast can do it all, but we have tried to build each mast so it suits certain areas a little better, which gives you the real choice of getting a mast built for what you do and for you to really push your boundaries.
COVERS, covers for the masts are made in Australia and are local to the ONE HQ. Please note that at the moment we are running well behind on the cover manufacturing. If you order a mast and don’t need the cover, this will speed up getting your mast out to you. If you require the cover and can wait a little extra for us to catch up, then still please order with a cover. Thank you for your patience
For Freight options please refer to our Freight Terms and Conditions page at bottom of main page.
Please use Tefgel on all bolts and is advised to use Candle wax or Vaseline when fitting to help with the tight fit and help the two part gotogether nicely. All joins have a glass barrier.
$1499 AUD is Approximately $1035USD, $928Euro, 774Pound, 147267.00Yen depending on exchange rates, this price includes freight!!
*All ONE masts have a glass barrier on the foot of the mast to help prevent corrosion. Masts have been fully tested using ONE Aluminum fuselages. All ONE fuselages are of the highest quality Aluminum and the best Anodising possible. If used on lower quality aluminum or lesser anodised Fuselages, corrosion may occur. Corrosion from low-quality fuselages is not covered by warranty.
*SSS masts are built for experienced riders; they are thin and built to give maximum efficiency while maintaining maximum stiffness. Although many do use the SSS masts for jumping and some big wingspan wings, we do not recommend jumping or riding massive wingspan wings on the SSS masts, where it can be helped. If jumping or mostly riding larger wingspan foils, we recommend going to the SS masts.
*Carbon masts are extremely strong but do require care to keep them this way. Please do not drop or mistreat your mast. Inspect your mast for damage regularly, and if ever damaged, please get the appropriate repair before using again.
Video Click
UPDATED 6th May
See below for masts availability of when they will leave the factory (Please note dates are approximate as small delays can happen or they can get finished earlier)
NEW 2026 Mast - 78cm SSS mast, Sold out, next available leaving the factory 23rd of May. Pre order now
84cmSSS mast, Sold out, next available leaving the factory 23rd of May. Pre order now
90cmSSS mast, Sold out until End of May. Get your Pre Order in now for the next available.
Make sure to check out the 2026 NEW products video down the bottom of this page.
Experience Next-Level Performance with the ONE Ultra High eModulus (UHM) Full Carbon Masts, engineered to the highest standards for riders who demand peak performance. Built with UHM carbon, the ONE masts deliver unmatched speed, stiffness, and responsiveness, ensuring you get the most out of every session on the water.
Key Features
Ultra-High Modulus autoclave Carbon Construction: Designed for maximum stiffness and lightweight performance, the ONE masts are built to help you push your limits. -
2-Way Tapered System: Optimized stiffness in critical areas while maintaining a sleek, flow-efficient profile for reduced drag and enhanced speed.
Axis Compatibility: All ONE masts seamlessly integrate with any Axis fuselage for a perfect fit.
Code & Lift Foils Compatibility: Use with Code and Lift foils by adding an adaptor (available as an add-on).
8mm Bolt Slots: Features bolt slots on the base plate for easy and secure 8mm bolt connections to your board or fuselage.
Titanium inserts are now standard on all masts
Quick & Easy Setup: Conveniently cut bolt slots ensure a fast and hassle-free setup every time.
The Autoclave difference- This method is considered superior to "out-of-autoclave" (OoA) molding because of its ability to achieve near-zero porosity.The autoclave’s high-pressure environment "crushes" any remaining microscopic air bubbles and volatiles within the resin.This results in a significantly higher fiber-to-resin ratio and superior interlaminar bonding, leading to parts that are not only lighter and stiffer but also up to 50% stronger in shear strength. This is why the aerospace and elite motorsport components, where structural failure is not an option and demand the best use the autoclave. The autoclave’s precision control over the curing cycle ensures a level of mechanical consistency and surface finish that other methods simply cannot replicate.
Why Choose the ONE UHM Masts? The ONE UHM mast is engineered to outperform the competition, offering superior stiffness and speed for all types of foiling—whether you're into downwind foiling, surf foiling, or wind winging. Its optimized thickness reduces drag, ensuring your wings perform at their best without any holdback.
Versatile & Reliable - All-Round Performance: From high-speed runs to smooth glides, the ONE UHM mast is your go-to for any foiling discipline. - Durable Design: Built to withstand the demands of intense riding while maintaining its premium performance.
Get the Most Out of Your Ride The ONE UHM mast is more than just equipment—it's your gateway to unlocking new levels of speed, control, and excitement on the water. Pair it with your favorite foils and experience the difference for yourself.
Ready to upgrade your setup? Add the ONE UHM mast to your gear today and take your foiling to the next level! Read below to find out which ONE mast is best suited to you and your riding.
The 2026 78cm SSS UHM Mast (Released May 7th/2026)
How do you improve on the fastest mast on the market? You redefine what’s possible.
The original 78SSS was already a benchmark for speed and control. For 2026, we didn’t just tweak the design—we re-engineered it. The new 78SSS Ultra-High Modulus (UHM) has been refined to offer less drag, a smoother ride, and a level of "invisible" performance that must be felt to be believed.
Engineering the "Invisible" Ride
The secret to the 2026 upgrade lies in its revolutionary new foil section. We’ve pushed the boundaries of hydrodynamics to create a mast that slices through the water with almost zero resistance.
Ultra-Thin Profile: Now only 11.9mm thick with a 10.2cm chord.
The Feel: This uniform thinness creates a massive performance window where the mast feels like it isn't even there, allowing you to focus entirely on the foil.
Unmatched Strength & Stiffness
Speed is nothing without control. To achieve this level of thinness without sacrificing stability, we utilize Advanced Autoclave Construction. This process ensures the highest possible carbon bonding, delivering class-leading bend and torsional stiffness. Even at high speeds or under heavy loads, the mast remains rock-solid and predictable.
Is the 78SSS Right For You?
If you are looking to unlock a new gear in your riding, this is your upgrade.
The Speed : Designed specifically for riders who want to push the limits of Downwind, Prone, Winging, or Parawing.
The control: Optimized for small-to-midsize foils. While it handles spans up to the 1080 Accelerate (1273mm span) with ease, it truly comes alive when paired with smaller high-performance Surf and DW foils.
Universal Compatibility
The 2026 78SSS is designed to fit your existing quiver seamlessly. It is compatible straight out of the box with:
Elevate Your Session
The 2026 78cm SSS UHM isn't just an upgrade; it’s a new standard. Experience the fastest, thinnest, and most responsive mast we’ve ever built.
The Legend Reborn: The 2026 84cm SSS UHM Mast
The mast that started the revolution just set a new pace.
The original 84cm was the foundation of the ONE lineup—the mast that changed the game and led the industry from the moment it launched. But for 2026, we haven’t just updated it; we’ve executed a complete ground-up redesign to bring this mast right to the cutting edge of the SSS performance line.
A Full Redesign for Endless Potential
While we kept the 12.2mm thickness that riders loved, everything else has been reimagined. The 2026 84SSS features a brand-new foil section and an optimized chord for maximum speed and efficiency.
Sleek & Consistent: Only 12.2mm thick with a 10.5cm chord, maintaining a razor-thin profile and only increasing slightly as you get higher on the mast
Redefined Foil Section: Built specifically for high-velocity riding, the new profile reduces drag and enhances glide across all disciplines.
Autoclave Precision: Constructed using our state-of-the-art autoclave process, ensuring the ultimate in carbon bonding, strength, and durability for a mast this slim.
Class-Leading Rigidity: Industry-best bend and torsional stiffness mean your input is translated directly to the foil with zero lag.
Who is the 84SSS For?
The 84cm length is the "sweet spot" for riders who need extra clearance for high-speed turns and choppy water without sacrificing an ounce of control.
Multi-Discipline Mastery: Whether you are pushing limits in Downwind, Prone, Winging, or Parawing, the 84SSS takes your performance to a whole new level.
The Performance Quiver: Optimized for small-to-midsize foils. It pairs perfectly with the ONE 1080 Accelerate (up to 1273mm span) but truly shines when pushing smaller, high-aspect Surf and DW foils to their top end.
Plug-and-Play Compatibility
The 2026 84SSS is ready to integrate into your setup immediately. It is compatible straight out of the box with:
The Original . Now Faster.
The mast that led the game has officially moved the goalposts. Don't just follow the pace—set it with the 2026 84cm SSS UHM.
90cmSSS UHM
Built for wind winging and tow foiling in mind, the 90cm UHM mast is for those who really want to push the limits.
The extra length gives a little more mast freedom when the waves and chop are bigger and conditions are just more on edge.
90cm in length, 10.5 cm minimum cord, and thickness 13.4mm.
Every ONE mast is purpose-built and targeted at certain disciplines of our foiling sports. Yes, each mast can do it all, but we have tried to build each mast so it suits certain areas a little better, which gives you the real choice of getting a mast built for what you do and for you to really push your boundaries.
COVERS, covers for the masts are made in Australia and are local to the ONE HQ. Please note that at the moment we are running well behind on the cover manufacturing. If you order a mast and don’t need the cover, this will speed up getting your mast out to you. If you require the cover and can wait a little extra for us to catch up, then still please order with a cover. Thank you for your patience
For Freight options please refer to our Freight Terms and Conditions page at bottom of main page.
Please use Tefgel on all bolts and is advised to use Candle wax or Vaseline when fitting to help with the tight fit and help the two part gotogether nicely. All joins have a glass barrier.
$1499 AUD is Approximately $1035USD, $928Euro, 774Pound, 147267.00Yen depending on exchange rates, this price includes freight!!
*All ONE masts have a glass barrier on the foot of the mast to help prevent corrosion. Masts have been fully tested using ONE Aluminum fuselages. All ONE fuselages are of the highest quality Aluminum and the best Anodising possible. If used on lower quality aluminum or lesser anodised Fuselages, corrosion may occur. Corrosion from low-quality fuselages is not covered by warranty.
*SSS masts are built for experienced riders; they are thin and built to give maximum efficiency while maintaining maximum stiffness. Although many do use the SSS masts for jumping and some big wingspan wings, we do not recommend jumping or riding massive wingspan wings on the SSS masts, where it can be helped. If jumping or mostly riding larger wingspan foils, we recommend going to the SS masts.
*Carbon masts are extremely strong but do require care to keep them this way. Please do not drop or mistreat your mast. Inspect your mast for damage regularly, and if ever damaged, please get the appropriate repair before using again.
Video Click
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
